CAMSHAFT OIL CONTROL VALVE(for Intake Side) REMOVAL

PROCEDURE


  1. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

    Click here

  2. SET NO. 1 CYLINDER TO TDC/COMPRESSION


    1. A01XPHPC01
      *a "0°" Timing Mark
      *b Timing Mark (Cutout)

      Turn the crankshaft clockwise to align the timing mark (cutout) on the crankshaft pulley assembly with the "0°" timing mark on the timing chain cover assembly.

    2. A01XMV6C01
      *a Protrusion

      Check that the protrusion on the inside of the camshaft timing gear assembly is at the top.

      Tech Tips

      If the protrusion is not at the top, rotate the crankshaft clockwise 360° and align the timing marks again.

  3. REMOVE CAMSHAFT TIMING GEAR BOLT


    1. B005AMHN01

      Using SST, hold the crankshaft pulley assembly.

      SST
      09213-54015
      09330-00021

      Tech Tips

      Part number of installation bolt for SST (crankshaft pulley holding tool): 91551-80650 (quantity: 2)

    2. A01HJ6P

      Remove the camshaft timing gear bolt.

      Note

      Replace with a new part if it is dropped or if it receives a strong impact.