TRANSFER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL TRANSFER AND TRANSAXLE SETTING STUD BOLT


  2. INSTALL TRANSFER ASSEMBLY


    1. A01XMUV

      Clean the bolt holes.

    2. Install the transfer assembly to the transaxle with the 6 nuts and 2 bolts.

      Torque:
      68.6 N*m  { 700 kgf*cm, 51 ft.*lbf }

  3. INSTALL DRIVE SHAFT BEARING BRACKET (for 3ZR-FAE)

    Click here

  4. INSTALL MANIFOLD STAY (for 3ZR-FAE)

    Click here

  5. INSTALL REAR ENGINE MOUNTING BRACKET


  6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 8AR-FTS)

    Click here

  7. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (for 3ZR-FAE)

    Click here

  8. ADD TRANSFER OIL

    Click here

  9. INSPECT TRANSFER OIL

    Click here