SHIFT LEVER REMOVAL

PROCEDURE


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. B005AVK

      Disconnect the end of the transmission control cable assembly from the shift lever assembly.

    3. B005B87C01
      *a Nut

      Rotate the nut of the transmission control cable assembly clockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.

  3. REMOVE SHIFT LEVER ASSEMBLY


    1. B005BHUC01
      *a Shift Lock Control ECU Connector
      *b Transmission Control Switch Connector

      Disconnect the transmission control switch connector.

    2. Disconnect the shift lock control ECU connector.

    3. Disconnect the 2 clamps from the shift lever assembly.

    4. B0057NG

      Remove the nut from the shift lever assembly.

    5. B0059BP

      Remove the 4 bolts and shift lever assembly from the body.