PROCEDURE
INSTALL TRANSMISSION REVOLUTION SENSOR (NT)
Apply Toyota Genuine CVT fluid FE to a new O-ring.
Install the O-ring to the transmission revolution sensor (NT).
Install the transmission revolution sensor (NT) to the continuously variable transaxle assembly with the bolt.
Connect the connector.
INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT)
Apply Toyota Genuine CVT fluid FE to a new O-ring.
Install the O-ring to the transmission revolution sensor (NOUT).
Install the transmission revolution sensor (NOUT) to the continuously variable transaxle assembly with the bolt.
Connect the connector.
INSTALL TRANSMISSION REVOLUTION SENSOR (NIN)
Apply Toyota Genuine CVT fluid FE to a new O-ring.
Install the O-ring to the transmission revolution sensor (NIN).
Install the transmission revolution sensor (NIN) to the continuously variable transaxle assembly with the bolt.
Connect the connector.
INSTALL BATTERY BRACKET REINFORCEMENT
INSTALL BATTERY CARRIER ASSEMBLY
CONNECT RADIATOR HOSE SUB-ASSEMBLY
INSTALL BATTERY TRAY
INSTALL BATTERY
INSTALL BATTERY CLAMP SUB-ASSEMBLY
INSTALL AIR CLEANER CASE SUB-ASSEMBLY
INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Install the air cleaner filter element sub-assembly to the air cleaner case sub-assembly.
INSTALL AIR CLEANER CAP AND HOSE
INSTALL NO. 2 CYLINDER HEAD COVER
CONNECT CABLE TO POSITIVE BATTERY TERMINAL
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
CHECK DATA LIST