TRANSMISSION CONTROL CABLE INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

   
   

   1. Install the transmission control cable assembly to the body with the 2 bolts.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   2. 

      Turn the control shaft lever clockwise until it stops. Next, turn the control shaft lever counterclockwise 2 notches to set it to N.

   3. Connect the transmission control cable assembly to the No. 1 transmission control cable bracket, and install a new clip.

   4. Connect the transmission control cable assembly to the control shaft lever with the nut.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

   Click here

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

6. INSPECT SHIFT LEVER POSITION

   Click here

7. ADJUST SHIFT LEVER POSITION

   Click here

8. INSTALL CONSOLE BOX ASSEMBLY (w/o ASC System)

   Click here

9. INSTALL NO. 1 SPEAKER WITH BOX ASSEMBLY (w/ ASC System)

   Click here