TRANSMISSION CONTROL CABLE ADJUSTMENT

PROCEDURE


  1. REMOVE NO. 1 SPEAKER WITH BOX ASSEMBLY (w/ ASC System)

    Click here

  2. REMOVE CONSOLE BOX ASSEMBLY (w/o ASC System)

    Click here

  3. ADJUST SHIFT LEVER POSITION


    1. Move the shift lever to N.

    2. B0058BOC01
      *a Slider
      *b Lock Piece
      *c Slide
      *d Pull

      Slide the slider of the transmission control cable assembly in the direction indicated by the arrow and pull the lock piece outward.

    3. Gently lift the cable rod with your fingers to pull the cable tight.

    4. B0058IAC01
      *a Adjuster Case
      *b Lock Piece

      Push the lock piece into the adjuster case.

      Note


      • Check that the shift lever position sensor and the shift lever are in neutral.

      • Securely push in the lock piece until the slider lock is engaged.

    5. After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the position again.

  4. INSTALL CONSOLE BOX ASSEMBLY (w/o ASC System)

    Click here

  5. INSTALL NO. 1 SPEAKER WITH BOX ASSEMBLY (w/ ASC System)

    Click here