OIL COOLER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  5. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  6. DRAIN AUTOMATIC TRANSAXLE FLUID

    Click here

  7. DRAIN ENGINE COOLANT

    Click here

  8. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  9. REMOVE BATTERY INSULATOR

  10. REMOVE BATTERY

  11. REMOVE BATTERY TRAY

  12. REMOVE BATTERY CARRIER ASSEMBLY

    Click here

  13. REMOVE BATTERY BRACKET REINFORCEMENT

    Click here

  14. REMOVE OIL COOLER HOSE


    1. w/ Air Cooled Transmission Oil Cooler:


      1. B0058AOC01
        *1 No. 1 Transmission Oil Cooler Hose Assembly
        *2 Oil Cooler Inlet Hose

        Detach the clamp from the No. 1 transmission oil cooler hose assembly.

      2. Slide the clip and disconnect the No. 1 transmission oil cooler hose assembly from the transmission oil cooler.

        Note

        Use a container to catch any fluid which flows out of the No. 1 transmission oil cooler hose assembly.

      3. Slide the 2 clips and remove the oil cooler inlet hose.

        Note

        Use a container to catch any fluid which flows out of the oil cooler inlet hose.

    2. w/o Air Cooled Transmission Oil Cooler:


      1. B0056YLC02
        *1 Oil Cooler Outlet Hose
        *2 Oil Cooler Inlet Hose

        Detach the clamp from the oil cooler outlet hose.

      2. Slide the 4 clips and remove the oil cooler inlet hose and oil cooler outlet hose.

        Note

        Use a container to catch any fluid which flows out of the oil cooler inlet hose and oil cooler outlet hose.

  15. REMOVE WATER BY-PASS HOSE


    1. B0057CX

      Detach the clamp from the No. 5 water by-pass hose.

    2. B005A3LC02
      *1 No. 5 Water By-pass Hose
      *2 No. 6 Water By-pass Hose

      Slide the 4 clips and remove the No. 5 water by-pass hose and No. 6 water by-pass hose.

      Note

      Use a container to catch any coolant which flows out of the No. 5 water by-pass hose, No. 6 water by-pass hose.

  16. REMOVE TRANSMISSION OIL COOLER


    1. B0057D0

      Remove the 3 bolts and transmission oil cooler from the front engine mounting bracket.

      Note

      Use a container to catch any coolant and any fluid which flows out of the transmission oil cooler.