DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE


  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  2. REMOVE DRIVE SHAFT BEARING BRACKET

    Click here

  3. REMOVE FRONT DRIVE SHAFT OIL SEAL LH


    1. A01XNYQN01

      Using SST, remove the front drive shaft oil seal LH from the automatic transaxle assembly.

      SST
      09308-00010

      Note

      Be careful not to damage the transaxle case sub-assembly.

  4. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A01XODVN01

      Using SST, remove the front drive shaft oil seal RH from the automatic transaxle assembly.

      SST
      09308-00010

      Note

      Be careful not to damage the transaxle housing.

  5. INSTALL FRONT DRIVE SHAFT OIL SEAL LH


    1. A01XPF2N03

      Using SST and a hammer, install a new front drive shaft oil seal LH to the automatic transaxle assembly.

      SST
      09316-10010
      09950-70010   ( 09951-07100 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Make sure that the front drive shaft oil seal LH is installed in the correct direction.

      • Do not damage the front drive shaft oil seal LH lip.

    2. Coat the lip of the front drive shaft oil seal LH with MP grease.

  6. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. A01XOFSN03

      Using SST and a hammer, install a new front drive shaft oil seal RH to the automatic transaxle assembly.

      SST
      09316-60011   ( 09316-00011 )
      Oil seal driven in depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Make sure that the front drive shaft oil seal RH is installed in the correct direction.

      • Do not damage the front drive shaft oil seal RH lip.

    2. Coat the lip of the front drive shaft oil seal RH with MP grease.

  7. INSTALL DRIVE SHAFT BEARING BRACKET

    Click here

  8. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here