PATTERN SELECT SWITCH REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE INSTRUMENT PANEL FINISH PLATE

   Click here

2. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET

   Click here

3. REMOVE CONSOLE ARMREST ASSEMBLY

   Click here

4. REMOVE UPPER REAR CONSOLE PANEL

   Click here

5. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

   Click here

6. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

   Click here

7. REMOVE INSTRUMENT SIDE PANEL RH

   Click here

8. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

9. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

11. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

12. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

13. REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

14. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

15. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

16. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

17. REMOVE SHIFT POSITION INDICATOR

    Click here

18. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (PATTERN SELECT SWITCH)

    
    

    1. 

       Remove the 2 screws and integration control and panel assembly (pattern select switch) to the rear upper console panel sub-assembly.