VACUUM SENSOR ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

   Click here

2. REMOVE COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

   Click here

3. REMOVE VACUUM SENSOR ASSEMBLY

   
   
   1. 

      *A	for LHD
      *B	for RHD

      Disconnect the connector from the vacuum sensor assembly.

   2. Remove the vacuum sensor assembly from the brake booster assembly.

4. REMOVE VACUUM SENSOR GROMMET

   
   

   1. Remove the vacuum sensor grommet from the brake booster assembly.