ENGINE STOP AND START ECU REMOVAL

PROCEDURE


  1. READ NUMBER OF STARTER OPERATIONS

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. REMOVE ECU INTEGRATION BOX RH (for LHD)

    B005AHYC02
    B0057RX Nut
    B0059IK Bolt

    1. Disconnect the connectors and 3 clamps.

    2. Remove the 2 nuts, bolt and ECU integration box RH.

  7. REMOVE ENGINE STOP AND START ECU (for LHD)

    B005BFH

    1. Disengage the 2 claws and remove the engine stop and start ECU from the ECU integration box RH.

  8. REMOVE ENGINE STOP AND START ECU (for RHD)


    1. B0059OWC01
      B0057RX Nut
      B0059IK Bolt
      B0057OP Connector

      Disconnect the 3 connectors from the engine stop and start ECU.

    2. Remove the bolt, nut and engine stop and start ECU.