FRONT ACCELERATION SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  2. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. REMOVE ACCELERATION SENSOR


    1. for RH side:


      1. B0058G1

        Disconnect the connector from the acceleration sensor.

      2. Remove the 2 nuts and acceleration sensor.

        Note


        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

    2. for LH side:


      1. B0057IF

        Disconnect the connector from the acceleration sensor.

      2. Remove the 2 nuts and acceleration sensor.

        Note


        • Avoid any impact to the acceleration sensor.

        • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.