8AR-FTS INTAKE / EXHAUST SERVICE DATA

COOLANT
Standard Capacity Classification
2.9 liters (3.1 US qts, 2.6 Imp. qts) Use only "TOYOTA Super Long Life Coolant", or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids).
TURBOCHARGER
Turbocharging pressure Standard pressure

120 kPa (1.2 kgf/cm2, 2.1 psi) or higher
Turbine with valve housing sub-assembly Warpage Standard 0.20 mm (0.00787 in.)
Waste gate valve Clearance Standard 0.50 mm (0.0197 in.)
Axial play of turbine shaft Standard 0.10 mm (0.00394 in.)
Compressor with bearing housing sub-assembly Pin protrusion Standard 2.9 to 3.8 mm (0.114 to 0.150 in.)
INTAKE AIR CONTROL VALVE
Air by-pass valve assembly Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 8.7 to 9.2 Ω
WASTE GATE VALVE ACTUATOR
waste gate valve actuator with bracket assembly Lift amount Standard 21.9 to 24.7 mm (0.862 to 0.972 in.)
EXHAUST PIPE
Compression spring for Front exhaust pipe sub-assembly side Minimum length 41.5 mm (1.63 in.)
for Tail exhaust pipe assembly side Minimum length 38.5 mm (1.52 in.)
RESERVE TANK CAP (for Intercooler)
Item Specified Condition
Standard value (for brand-new cap)

93 to 123 kPa (1.0 to 1.3 kgf/cm2, 13.5 to 18 psi)
Minimum standard value (for used cap)

79 kPa (0.8 kgf/cm2, 11.4 psi)