ДАТЧИК ТОКА АККУМУЛЯТОРНОЙ БАТАРЕИ УСТАНОВКА

PROCEDURE

1. INSTALL BATTERY CURRENT SENSOR ASSEMBLY

   
   

   1. Engage the 2 claws to install the battery state sensor assembly to the battery state sensor holder.

   2. Engage the clamp and connect the battery state sensor assembly connector.

   3. Install the battery state sensor assembly to the battery and tighten the nut.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   4. Connect the engine wire to the battery state sensor assembly with the nut.

      Torque:

      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here