ГЕНЕРАТОР УСТАНОВКА

PROCEDURE

1. Click here

   INSTALL GENERATOR ASSEMBLY

   
   

   1. Install the generator assembly with the 2 bolts.

      52 N*m

      530 kgf*cm

      38 ft.*lbf

   2. Connect the wire harness clamp bracket with the bolt.

      7.7 N*m

      79 kgf*cm

      68 in.*lbf

   3. Connect the generator assembly connector.

   4. Connect the wire harness to terminal B with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   5. Install the terminal cap.

2. Click here

   INSTALL V-RIBBED BELT

   Click here

3. Click here

   INSTALL RADIATOR COVER SUB-ASSEMBLY (for ALPHARD)

   Click here

4. Click here

   INSTALL RADIATOR COVER SUB-ASSEMBLY (for VELLFIRE)

   Click here

5. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here