СИСТЕМА СМАЗКИ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE


  1. CHECK ENGINE OIL LEVEL


    1. Warm up and stop the engine, then wait for 5 minutes.

    2. Check that the engine oil level is between the low level and full level marks on the engine oil level dipstick.

      If the level is low, check for engine oil leaks and add engine oil to the full level mark.

      Note

      Do not fill to above the full level mark.

  2. CHECK ENGINE OIL QUALITY


    1. Check the engine oil for deterioration, water intrusion, discoloration or thinning.

      If the quality is visibly poor, replace the engine oil and oil filter element.

  3. INSPECT OIL PRESSURE

    CAUTION:


    • A01IKSJ

      To prevent injury due to contact with an operating V-ribbed belt or cooling fan, keep your hands and clothing away from the V-ribbed belt and cooling fans when working in the engine compartment with the engine running or the engine switch on (IG).

    • A01UDRU

      To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.

    • A01IHLV

      To prevent burns, do not remove the engine oil pressure switch assembly while the engine is hot.


    1. Remove the engine oil pressure switch assembly.

      Click here

    2. A01IEOF

      Install an oil pressure gauge with the adapter.

    3. Warm up the engine.

      Tech Tips

      After warming up the engine, the engine coolant temperature is 75 to 100°C (167 to 212°F).

    4. Check the oil pressure.

      Standard Oil Pressure
      Engine Condition Oil Pressure
      Idling

      30 kPa (0.3 kgf/cm2, 4.4 psi) or higher
      4000 rpm

      260 kPa (2.7 kgf/cm2, 38 psi) or higher

      If the result is not as specified, check the quality of the engine oil and check the oil paths for clogging. Repair or replace if necessary. If the engine oil pressure is still not as specified, check the timing chain cover sub-assembly.

    5. Remove the oil pressure gauge with the adapter.

    6. Install the engine oil pressure switch assembly.

      Click here

    7. Inspect for engine oil leaks.

      Click here