НАСОС СИСТЕМЫ ОХЛАЖДЕНИЯ УСТАНОВКА

PROCEDURE

1. Click here

   INSTALL ENGINE WATER PUMP ASSEMBLY

   
   

   1. Install a new water pump gasket and the engine water pump assembly with the 7 bolts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

2. Click here

   INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

   
   

   1. Type A:

      
      

      1. Temporarily install the V-ribbed belt tensioner assembly to the water inlet housing with the bolt.

      2. 

         *a	Torque Wrench Fulcrum Length

         Fully tighten the bolt.

         09961-00950

         Specified tightening torque
         21 N*m	214 kgf*cm	15 ft.*lbf

         Tip:
         

         • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

           Click here

         • When using SST (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 19 N*m (194 kgf*cm, 14 ft.*lbf)

      3. Install the dust cover to the V-ribbed belt tensioner assembly.

   2. Type B:

      
      

      1. Temporarily install the V-ribbed belt tensioner assembly to the water inlet housing with the bolt.

      2. 

         *a	Torque Wrench Fulcrum Length

         Fully tighten the bolt.

         09961-00950

         Specified tightening torque
         21 N*m	214 kgf*cm	15 ft.*lbf

         Tip:
         

         • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

           Click here

         • When using SST (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 19 N*m (194 kgf*cm, 14 ft.*lbf)

3. Click here

   INSTALL GENERATOR ASSEMBLY

   Click here

4. Click here

   ADD ENGINE COOLANT

   Click here

5. Click here

   INSPECT FOR COOLANT LEAK

   Click here