ЭЛЕКТРОВАКУУМНЫЙ КЛАПАН (для ACIS) УСТАНОВКА

PROCEDURE

1. INSTALL VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

   
   

   1. Install the vacuum hose clamp to the vacuum switching valve assembly (for ACIS) with the bolt.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

   2. Install the vacuum switching valve assembly (for ACIS) to the intake manifold with the bolt.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   3. Connect the vacuum switching valve assembly (for ACIS) connector.

   4. Connect the 2 vacuum hoses.

   5. Engage the wire harness clamp.

   6. Connect the union to check valve hose to the vacuum hose clamp.

2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

   Click here

3. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

4. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

5. INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

   Click here

6. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

7. INSPECT WASHER NOZZLE

   Click here