ЭЛЕКТРОВАКУУМНЫЙ КЛАПАН (для ACIS) СНЯТИЕ

Click here Click here

PROCEDURE

1. Click here

   REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

2. Click here

   SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

   Click here

3. Click here

   REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

4. Click here

   REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

5. Click here

   REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

   Click here

6. Click here

   REMOVE VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

   
   
   1. 

      Disconnect the union to check valve hose from the vacuum hose clamp.

   2. Disengage the wire harness clamp.

   3. Disconnect the 2 vacuum hoses.

   4. Disconnect the vacuum switching valve assembly (for ACIS) connector.

   5. Remove the bolt and vacuum switching valve assembly (for ACIS) from the intake manifold.

   6. 

      Remove the bolt and vacuum hose clamp from the vacuum switching valve assembly (for ACIS).