КЛАПАН ПРОДУВКИ АДСОРБЕРА СНЯТИЕ

PROCEDURE


  1. REMOVE PURGE VALVE (PURGE VSV)


    1. A01IG0PC01
      *1 No. 1 Fuel Vapor Feed Hose
      *2 No. 2 Fuel Vapor Feed Hose

      Slide the clip and disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).

    2. Slide the clip and disconnect the No. 2 fuel vapor feed hose from the purge valve (purge VSV).

    3. Disconnect the purge valve (purge VSV) connector.

    4. Disengage the wire harness clamp from the purge valve (purge VSV).

    5. Remove the purge valve (purge VSV) from the air cleaner hose sub-assembly.