АДСОРБЕР ПРОВЕРКА

PROCEDURE


  1. CHECK CANISTER (FUEL SUCTION PLATE SUB-ASSEMBLY)


    1. Visually check the canister (fuel suction plate sub-assembly).


      1. Visually check the canister (fuel suction plate sub-assembly) for cracks or damage.

        If cracks or damage are found, replace the canister (fuel suction plate sub-assembly).

    2. Inspect the airflow of the canister (fuel suction plate sub-assembly).


      1. A01IFRFC01
        *a Port (A)
        *b Port (B)
        *c Port (C)
        *d Air

        Close the port (B) and check that air flows from the port (A) when air is blown into the port (C).

        OK
        Air flows from the port (C).

    3. Inspect the check valve.


      1. A01IJUAC01
        *a Port (A)
        *b Port (B)
        *c Port (C)
        *d Air

        Close the port (C) and check that air flows from the port (B) when air is blown into the port (A).

        OK
        Air flows from the port (B).
      2. A01IEK4C01
        *a Port (A)
        *b Port (B)
        *c Port (C)
        *d Vacuum Pump

        Using a vacuum pump, apply vacuum to the port (A) with the port (C) closed and check that air flows into the port (B).

        OK
        Air flows into the port (B).