ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ УСТАНОВКА

PROCEDURE


  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

    Click here


    1. Install a new gasket to the engine coolant temperature sensor.

    2. A01UDUVN01

      Using SST, install the engine coolant temperature sensor to the cylinder head sub-assembly.

      SST
      09817-33191
      Torque:
      19.6 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

    3. Connect the engine coolant temperature sensor connector.

  2. INSTALL BATTERY

    Click here

  3. ADD ENGINE COOLANT

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. INSPECT FOR COOLANT LEAK

    Click here

  6. INSTALL CENTER NO. 1 COWL TOP VENTILATOR LOUVER

    Click here

  7. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

      Click here