КАТУШКА ЗАЖИГАНИЯ И СВЕЧА ЗАЖИГАНИЯ СНЯТИЕ

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the ignition coil assembly or spark plug removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
Replacement of ignition coil assembly Inspection After Repair

  • Poor idle, etc.

  • Engine start function, etc.

Click here

Replacement of spark plug

PROCEDURE


  1. REMOVE IGNITION COIL ASSEMBLY


    1. A01IL8O

      Disconnect the 4 ignition coil assembly connectors.

    2. Remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.

  2. REMOVE SPARK PLUG


    1. A01IHKW

      Remove the 4 spark plugs from the cylinder head sub-assembly.

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Arrange the removed parts in the correct order.