Click here

WHEEL OPENING MOULDING INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL REAR BUMPER SIDE MOULDING SUB-ASSEMBLY


    1. Clean the rear bumper cover.


      1. Remove any remaining double-sided tape from the rear bumper cover.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new rear bumper side moulding sub-assembly.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. A01FL23C01
      *a Double-sided Tape

      Engage the 2 guides.

    4. A01FMXD

      Install the rear bumper side moulding sub-assembly with the outside moulding retainer.