Click here

REAR BUMPER REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE NO. 1 REAR BUMPER PLATE

    Tip:

    Use the same procedure for the RH side and LH side.


    1. A01FOIZC01
      *a Hook
      B00667M Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook to remove the No. 1 rear bumper plate.

  2. Click here

    REMOVE REAR BUMPER ASSEMBLY


    1. A01FK99C01
      B00667M Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. A01FLRB

      Remove the 2 bolts.

    3. A01FL7J

      Using a clip remover, remove the 6 clips.

    4. A01FM6B

      Remove the screw.

      Tip:

      Use the same procedure for the RH side and LH side.

    5. Disengage the claw.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. A01FMVRC01
      *a Screwdriver
      B00667M Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    7. A01FNU5

      Disengage the 8 claws and remove the rear bumper assembly as shown in the illustration.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector.