HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. Click here

   INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Install the rear height control sensor sub-assembly with the 2 bolts and nut.

      Bolt
      8.5 N*m	87 kgf*cm	75 in.*lbf
      Nut
      8.0 N*m	82 kgf*cm	71 in.*lbf

   2. Engage the clamp.

   3. Connect the connector.

2. Click here

   INSTALL REAR WHEEL LH

   Click here

3. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. Click here

   INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

5. Click here

   ADJUST HEADLIGHT AIMING

   Click here