HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. B00673V

      Engage the guide to temporarily install the headlight assembly as shown in the illustration.

    2. B00662YC01
      *a Connector Lock Lever
      B00667M Protective Tape

      Install the headlight assembly with the 2 bolts and screw.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.

    4. Remove the protective tape.

  2. INSTALL UPPER FRONT FENDER PROTECTOR


    1. Engage the guide as indicated by the arrows, in the order shown in the illustration.

      B0066SXE01

    2. Engage the 4 clips.

    3. Engage the guide to install the upper front fender protector.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. PERFORM INITIALIZATION

    Click here

  5. ADJUST HEADLIGHT AIMING

    Click here