Click here

HEADLIGHT ASSEMBLY INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT HEADLIGHT HOUSING ASSEMBLY LH


    1. Remove the headlight assembly LH.

      Click here

    2. Remove the headlight housing assembly LH from the headlight assembly LH.

      Click here

    3. A01FO4GC06
      *a

      Component without harness connected

      (Headlight Housing Assembly LH)

      		 - -

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - E-8 Always Below 1 Ω
      A-2 - B-1 Always Below 1 Ω
      B-2 - C-1 Always Below 1 Ω
      C-2 - E-7 Always Below 1 Ω
      D-1 - F-4 Always Below 1 Ω
      D-2 - F-3 Always Below 1 Ω
      G-1 - F-14 Always Below 1 Ω
      G-2 - F-15 Always Below 1 Ω
      G-3 - F-6 Always Below 1 Ω
      LVL-1 - F-17 Always Below 1 Ω
      LVL-2 - F-8 Always Below 1 Ω
      LVL-3 - F-20 Always Below 1 Ω

      If the result is not as specified, replace the headlight unit LH.

  2. Click here

    INSPECT HEADLIGHT HOUSING ASSEMBLY RH


    1. Remove the headlight assembly RH.

      Click here

    2. Remove the headlight housing assembly RH from the headlight assembly RH.

      Click here

    3. A01FOASC06
      *a

      Component without harness connected

      (Headlight Housing Assembly RH)

      		 - -

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - E-8 Always Below 1 Ω
      A-2 - B-1 Always Below 1 Ω
      B-2 - C-1 Always Below 1 Ω
      C-2 - E-7 Always Below 1 Ω
      D-1 - F-4 Always Below 1 Ω
      D-2 - F-3 Always Below 1 Ω
      G-1 - F-14 Always Below 1 Ω
      G-2 - F-15 Always Below 1 Ω
      G-3 - F-6 Always Below 1 Ω
      LVL-1 - F-17 Always Below 1 Ω
      LVL-2 - F-8 Always Below 1 Ω
      LVL-3 - F-20 Always Below 1 Ω

      If the result is not as specified, replace the headlight unit RH.