HEADLIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE UPPER FRONT FENDER PROTECTOR


    1. Disengage the guide.

      B00664EE01

    2. Using a clip remover, disengage the 4 clips.

    3. Disengage the guide to remove the upper front fender protector as indicated by the arrows, in the order shown in the illustration.

  3. REMOVE HEADLIGHT ASSEMBLY


    1. B0065KNC01
      *a Connector Lock Lever
      B00667M Protective Tape

      Apply protective tape around the headlight assembly as shown in the illustration.

    2. Disengage the claw and pull down the connector lock lever to disconnect the connector as shown in the illustration.

    3. Remove the 2 bolts and screw.

    4. B0066AS

      Disengage the guide to remove the headlight assembly as shown in the illustration.