REAR LIGHT ASSEMBLY REASSEMBLY

PROCEDURE

1. Click here

   INSTALL REAR LIGHT GASKET

   
   
   1. 

      Install 3 new rear light gaskets.

2. Click here

   INSTALL REAR LIGHT SOCKET AND WIRE

   
   
   1. 

      Connect the connector to install the rear light socket and wire.

3. Click here

   INSTALL REAR LIGHT SOCKET AND WIRE (for Drive Side with Rear Fog Light)

   
   
   1. 

      Connect the connector.

   2. Engage the clamp to install the rear light socket and wire.

4. Click here

   INSTALL REAR LIGHT GASKET LH

   
   
   1. 

      Install a new rear light gasket LH.

   2. Engage the rear light socket and wire to the slit.

   3. 

      Press Area

      Press the rear light gasket LH at the area shown in the illustration to remove any gaps.

      Note:

      To prevent water, foreign matter and insects from entering, make sure to press the rear light gasket LH with a sufficient amount of force.

5. Click here

   INSTALL BACK-UP LIGHT BULB

   
   
   1. 

      Install the back-up light bulb to the rear light socket and wire.

   2. 

      Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.