Click here

REAR COMBINATION LIGHT ASSEMBLY INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01FKZTC01
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply battery voltage to the rear combination light assembly LH and check that the lights come on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2 (STP)

      Battery negative (-) → Terminal 3 (E)

      		 Stop light comes on

      Battery positive (+) → Terminal 1 (TL)

      Battery negative (-) → Terminal 3 (E)

      		 Taillight comes on

      If the result is not as specified, replace the rear combination light assembly LH.

  2. Click here

    INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A01FKZTC02
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply battery voltage to the rear combination light assembly RH and check that the lights come on.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2 (STP)

      Battery negative (-) → Terminal 3 (E)

      		 Stop light comes on

      Battery positive (+) → Terminal 1 (TL)

      Battery negative (-) → Terminal 3 (E)

      		 Taillight comes on

      If the result is not as specified, replace the rear combination light assembly RH.