RAIN SENSOR REMOVAL

PROCEDURE

1. Click here

   REMOVE RAIN SENSOR COVER

   
   
   1. 

      Disengage the 2 claws and slide the rain sensor cover as shown in the illustration.

   2. 

      *a

      Stopper

      Release the stopper by pulling it out and disconnect the rain sensor as indicated by the arrows, in the order shown in the illustration.

   3. 

      Disengage the 2 claws to remove the rain sensor cover as shown in the illustration.

2. Click here

   REMOVE RAIN SENSOR

   
   
   1. 

      Disconnect the connector to remove the rain sensor.

3. Click here

   CLEAN WINDSHIELD GLASS

   Tip:
   

   • The rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated with foreign matter.

   • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.

   • If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.