Click here

HEADLIGHT CLEANER MOTOR INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

    Tip:

    This check should be performed with the headlight cleaner motor and pump assembly installed to the washer jar.


    1. Fill the washer jar with washer fluid.

    2. A01FMQKC08
      *a

      Component without harness connected

      (Headlight Cleaner Motor and Pump Assembly)

      Connect a positive (+) lead from the battery to terminal 2 of the headlight cleaner motor and pump assembly, and a battery negative (-) lead to terminal 1.

    3. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the headlight cleaner motor and pump assembly.