WIPER SWITCH INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B0065R5

      Engage the claw as shown in the illustration to install the windshield wiper switch assembly.

    2. Connect the 2 connectors.

  2. INSTALL TILT AND TELESCOPIC SWITCH (for LH Side)

    Click here

  3. INSTALL STEERING COLUMN COVER


    1. Engage the claw to install the steering column cover (upper).

    2. Engage the 4 clips and 2 claws to connect the steering column cover (upper) to the instrument cluster finish panel assembly.

    3. B0067FT

      Temporarily install the steering column cover (lower) as shown in the illustration.

    4. B0067OP

      Engage the 2 claws.

    5. B0065YP

      Engage the 2 claws.

    6. Install the screw.

    7. Turn the steering wheel assembly to the left and install the screw.

    8. Turn the steering wheel assembly to the right and install the steering column cover (lower) with the screw.

  4. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Click here