Click here

FRONT WIPER MOTOR INSPECTION

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:

Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.

Click here

PROCEDURE


  1. *a Component without harness connected (Windshield Wiper Motor Assembly)
    Click here

    INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)


    1. Check the LO operation.


      1. Connect a positive (+) lead from the battery to terminal 5 (+1) and a negative (-) lead to terminal 4 (E), and check that the motor operates at low speed.

        OK
        Motor operates at low speed (LO).

    2. Check the HI operation.


      1. Connect a positive (+) lead from the battery to terminal 3 (+2) and a negative (-) lead to terminal 4 (E), and check that the motor operates at high speed.

        OK
        Motor operates at high speed (HI).

        If the result is not as specified, replace the windshield wiper motor assembly.

  2. *a Component without harness connected (Windshield Wiper Motor Assembly)
    Click here

    INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)


    1. Check the LO operation.


      1. Connect a positive (+) lead from the battery to terminal 1 (+1) and a negative (-) lead to terminal 5 (E), and check that the motor operates at low speed.

        OK
        Motor operates at low speed (LO).

    2. Check the HI operation.


      1. Connect a positive (+) lead from the battery to terminal 4 (+2) and a negative (-) lead to terminal 5 (E), and check that the motor operates at high speed.

        OK
        Motor operates at high speed (HI).

        If the result is not as specified, replace the windshield wiper motor assembly.