Click here

WASHER NOZZLE REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:
  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A01FMLRC01
      *a Protective Tape

      Using a screwdriver, disengage the 2 claws as indicated by the arrows, in the order shown in the illustration to separate the washer nozzle sub-assembly.

      Note:

      Be careful not to damage the windshield.

      Tip:

      Tape the screwdriver tip before use.

    2. A01FO7N

      Disconnect the washer hose to remove the washer nozzle sub-assembly.

      Note:

      Washer nozzle sub-assemblies cannot be reused.