WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01FNK2C01
      *a Vehicle center line - -
      B00667M Measurement - -
      Standard Clearance
      Area Measurement Area Measurement
      A 78.4 mm (3.09 in.) B 78.2 mm (3.08 in.)
      C 193.7 mm (7.63 in.) D 153.4 mm (6.04 in.)
      E 90.4 mm (3.56 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.