WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01FODX

      Install the windshield washer motor and pump assembly as shown in the illustration.

    2. Connect the connector.

    3. A01FLPU

      Connect the washer hose.

  2. ADD WINDSHIELD WASHER FLUID


    1. Add windshield washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER LH


    1. Install the front fender liner LH with the 8 clips.

    2. Install the clip.

    3. Install the clip.

    4. Install the 10 screws.

    5. Install 2 new bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    6. Install the 3 screws.

    7. A01FNM3C01
      *a Correct
      *b Incorrect

      Install the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH


    1. Install the front wheel opening extension pad LH with the 3 screws.

  5. INSTALL FRONT WHEEL LH

    Click here