WASHER MOTOR REMOVAL

PROCEDURE

1. Click here

   REMOVE FRONT WHEEL LH

   Click here

2. Click here

   REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

   
   
   1. 

      Remove the 3 screws and front wheel opening extension pad LH.

3. Click here

   REMOVE FRONT FENDER LINER LH

   
   
   1. 

      *a

      90°

      Using a screwdriver, turn the pin 90 degrees clockwise to remove the pin hold clip.

   2. 

      Remove the 3 screws.

   3. 

      Remove the 2 bolts.

   4. 

      Remove the 10 screws.

   5. 

      Remove the clip.

   6. 

      Remove the clip.

   7. 

      Remove the 8 clips and front fender liner LH.

4. Click here

   DRAIN WINDSHIELD WASHER FLUID

   
   
   1. 

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.

      Tip:

      Use a container to collect the windshield washer fluid.

5. Click here

   REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

   
   
   1. 

      Disconnect the connector.

   2. Remove the windshield washer motor and pump assembly as shown in the illustration.