Click here

FUEL LID OPENER MOTOR ASSEMBLY INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY


    1. A01FLKNC04
      *a

      Component without harness connected

      (Fuel Lid Lock with Motor Assembly)
      *b Shaft Stroke
      *c Unlock
      *d Lock

      Check the operation of the fuel lid lock with motor assembly.


      1. Apply battery voltage to the fuel lid lock with motor assembly connector, and check that the fuel lid lock with motor assembly operates smoothly as follows.

        OK
        Connection Specified Condition

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Unlock

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Lock

        If the result is not as specified, replace the fuel lid lock with motor assembly.

      2. Measure the shaft stroke.

        Standard
        Area Condition Specified Condition
        Shaft stroke Unlock

        11 mm

        (0.433 in.)
        Lock

        0 mm

        (0 in.)

        If the result is not as specified, replace the fuel lid lock with motor assembly.