HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  3. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B0066W9

      Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly.

  5. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. B0066C6

      Disengage the 2 clamps.

    2. B00672Z

      Remove the 2 clips.

    3. Disengage the clamp to remove the hood lock release lever protector.

  6. REMOVE HOOD LOCK ASSEMBLY


    1. B0065PZ

      Disconnect the connector.

    2. Remove the 3 bolts.

    3. for LHD:


      1. B0065H5

        Disconnect the hood lock control cable assembly to remove the hood lock assembly.

    4. for RHD:


      1. B0066C0

        Disconnect the hood lock control cable assembly to remove the hood lock assembly.

  7. REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. B00688G

      Remove the 2 bolts.

    2. Disengage the 2 claws and remove the hood lock control cable cover.

  8. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. B00659C

      Tie a string to the end of the hood lock control cable assembly.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. B00675DC01
      *1 Hood Lock Control Cable Assembly
      *a Grommet

      Pull out the hood lock control cable assembly through the grommet as shown in the illustration.

      Tech Tips

      Leave the string inside the grommet.

    3. Disconnect the string from the hood lock control cable assembly.

    4. Using a screwdriver, disengage the 4 clamps.

      B0067C7C01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp - -

      Tech Tips

      Tape the screwdriver tip before use.

    5. Pull the hood lock control cable assembly from the engine compartment to remove it.

  9. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. B00659C

      Tie a string to the end of the hood lock control cable assembly.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. B0065ASC01
      *1 Hood Lock Control Cable Assembly
      *a Grommet

      Pull out the hood lock control cable assembly through the grommet as shown in the illustration.

      Tech Tips

      Leave the string inside the grommet.

    3. Disconnect the string from the hood lock control cable assembly.

    4. Using a screwdriver, disengage the 4 clamps.

      B00687HC01
      *1 Hood Lock Control Cable Assembly - -
      *a Clamp - -

      Tech Tips

      Tape the screwdriver tip before use.

    5. Pull the hood lock control cable assembly from the engine compartment to remove it.