HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas a through f are within each standard range.

      A01FKQXN01
      Standard Clearance
      Area Measurement Area Measurement
      a 1.85 to 5.85 mm (0.0728 to 0.230 in.) b -1.85 to 2.15 mm (-0.0728 to 0.0846 in.)
      c 3.45 to 7.45 mm (0.136 to 0.293 in.) d -2.05 to 1.95 mm (-0.0807 to 0.0768 in.)
      e 2.2 to 5.2 mm (0.0866 to 0.205 in.) f -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)