Click here

SLIDING ROOF HOUSING REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE NO. 2 SLIDING ROOF SIDE GARNISH LH


    1. Press and hold the UP switch until the sliding roof glass sub-assembly is fully tilted up.

    2. A01FL08

      Remove the No. 2 sliding roof side garnish LH.

  2. Click here

    REMOVE NO. 2 SLIDING ROOF SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  3. Click here

    REMOVE NO. 1 SLIDING ROOF SIDE GARNISH LH


    1. A01FLDQ

      Disengage the 3 claws to remove the No. 1 sliding roof side garnish LH.

  4. Click here

    REMOVE NO. 1 SLIDING ROOF SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  5. Click here

    REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY


    1. Press and hold the DOWN switch until the sliding roof glass sub-assembly is fully tilted down.

    2. A01FOYA

      Using a T25 "TORX" socket wrench, remove the 4 screws and sliding roof glass sub-assembly.

      Note:

      To prevent the sliding roof glass sub-assembly and sliding roof drive gear sub-assembly from being displaced, fully close the sliding roof glass sub-assembly, and then remove the sliding roof glass sub-assembly.

  6. Click here

    REMOVE SLIDING ROOF WEATHERSTRIP


    1. Remove the sliding roof weatherstrip from the sliding roof panel sub-assembly.

  7. Click here

    REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH

    Click here

  8. Click here

    REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  9. Click here

    REMOVE SLIDING ROOF HOUSING ASSEMBLY


    1. A01FKZ4

      for Clamp Type:


      1. Disengage the claw and disconnect the sliding roof drain hose.

        Tip:

        Use the same procedure for the other 3 sliding roof drain hoses.

    2. A01FOOY

      for Clip Type:


      1. Expand the clip and disconnect the sliding roof drain hose.

        Tip:

        Use the same procedure for the other 3 sliding roof drain hoses.

    3. A01VMZZ

      Remove the 6 bolts, 8 nuts and sliding roof housing assembly.