Click here

ROOF HEADLINING DISASSEMBLY

Click here
Click here Click here

PROCEDURE


  1. Click here

    REMOVE VANITY LIGHT ASSEMBLY

    Tip:

    Use the same procedure for the RH side and LH side.


    1. B0066QFC01
      *1 Bulb Holder

      Disengage the 2 claws (A) and separate the bulb holder from the vanity light as indicated by the arrows, in the order shown in the illustration.

    2. Disengage the claw (B) to remove the vanity light assembly.

  2. Click here

    REMOVE COAT HOOK

    Tip:

    Use the same procedure for the RH side and LH side.


    1. B0066HB

      Disengage the 6 claws and remove the coat hook.

  3. Click here

    REMOVE NO. 1 ROOF WIRE


    1. B0065YCC01
      *A w/o Sliding Roof *B w/ Sliding Roof
      *C w/o Lane Departure Alert System without Rain Sensor *D w/o Lane Departure Alert System with Rain Sensor
      B00667M Adhesive Tape - -

      Remove the adhesive tape from the roof headlining assembly.

    2. B0067GYC01
      *A w/o Sliding Roof *B w/ Sliding Roof

      Turn the 2 visor connectors counterclockwise approximately 45° and remove them from the roof headlining assembly.

    3. w/o Sliding Roof:


      1. Disengage the 6 clamps and remove the No. 1 roof wire from the roof headlining assembly.

    4. w/ Sliding Roof:


      1. Disengage the 11 clamps and remove the No. 1 roof wire from the roof headlining assembly.