FRONT CONSOLE BOX REMOVAL

PROCEDURE


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01FNE1

      Disengage the claw and disconnect the shift hole cover sub-assembly as shown in the illustration.

    2. A01FN0R

      Turn the shift lever knob sub-assembly counterclockwise and remove it.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


    1. A01FMGZN01

      Using a moulding remover, disengage the 3 clips in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the instrument panel finish panel end LH in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the instrument panel finish panel end LH.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


    1. A01FNR0N01

      Using a moulding remover, disengage the 3 clips in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the instrument panel finish panel end RH in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the instrument panel finish panel end RH.

  4. REMOVE FRONT PANEL GARNISH LH


    1. A01FKY4

      Remove the 2 screws.

    2. Disengage the 5 clips to remove the front panel garnish LH.

  5. REMOVE FRONT PANEL GARNISH RH


    1. A01FL4Q

      Remove the 2 screws.

    2. Disengage the 5 clips to remove the front panel garnish RH.

  6. REMOVE FRONT NO. 1 CONSOLE BOX INSERT


    1. A01FK7MN01

      Disengage the clip in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the front No. 1 console box insert in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the front No. 1 console box insert.

  7. REMOVE FRONT NO. 2 CONSOLE BOX INSERT


    1. A01FKPWN01

      Disengage the clip in the direction indicated by the arrow (1) shown in the illustration.

    2. Pull the front No. 2 console box insert in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the front No. 2 console box insert.

  8. REMOVE CONSOLE PANEL SUB-ASSEMBLY


    1. A01FLL2

      Remove the screw.

    2. Move the shift lever to N.

    3. Disengage the 8 claws, clip and 4 guides as shown in the illustration.

      A01FNU3

    4. Disconnect each connector to remove the console panel sub-assembly.

  9. REMOVE NO. 2 CONSOLE BOX SILENCER PAD


    1. A01FKUH

      Remove the 2 No. 2 console box silencer pads.

  10. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    1. A01FL3J

      Disengage the clamp.

    2. Remove the 5 screws and remove the instrument panel cup holder assembly.

  11. REMOVE CONSOLE BOX REGISTER ASSEMBLY


    1. A01FLRX

      Using a moulding remover, disengage the 4 claws, 4 clips and guide and remove the console box register assembly as shown in the illustration.

  12. REMOVE CONSOLE BOX ASSEMBLY


    1. A01FLHT

      Remove the 6 bolts.

    2. A01FO6U

      Pull the rear part of the console box assembly as shown in the illustration to disengage the 2 guides and remove the console box assembly.

    3. Disconnect each connector.