AIR CONDITIONING PRESSURE SENSOR INSTALLATION

PROCEDURE

1. Click here

   INSTALL AIR CONDITIONER PRESSURE SENSOR

   
   

   1. Remove the vinyl tape from the liquid pipe sub-assembly and the connecting part of the air conditioner pressure sensor.

   2. Sufficiently apply compressor oil to a new air conditioner pressure sensor and the fitting surface of the air conditioner pressure sensor.

      Refrigerant	Compressor Oil
      HFC-134a (R134a)	ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf)	ND-OIL 12 or equivalent

   3. 

      *a	Turn
      *b	Hold

      Using a 27 mm deep socket wrench, install the air conditioner pressure sensor as shown in the illustration.

      10.8 N*m

      110 kgf*cm

      8 ft.*lbf

   4. Connect the connector.

2. Click here

   INSTALL NO. 2 COOLER COVER

   
   

   1. Install the No. 2 cooler cover.

3. Click here

   INSTALL LOW PITCHED HORN ASSEMBLY

   Click here

4. Click here

   CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (for HFC-134a(R134a))

   Click here

5. Click here

   CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (for HFO-1234yf(R1234yf))

   Click here

6. Click here

   WARM UP ENGINE (for HFC-134a(R134a))

   Click here

7. Click here

   WARM UP ENGINE (for HFO-1234yf(R1234yf))

   Click here

8. Click here

   INSPECT FOR REFRIGERANT LEAK (for HFC-134a(R134a))

   Click here

9. Click here

   INSPECT FOR REFRIGERANT LEAK (for HFO-1234yf(R1234yf))

   Click here