CONDENSER REMOVAL

PROCEDURE

1. Click here

   RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))

   Click here

2. Click here

   RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))

   Click here

3. Click here

   REMOVE INLET NO. 1 AIR CLEANER

   Click here

4. Click here

   REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

   Click here

5. Click here

   DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY

   Click here

6. Click here

   REMOVE HOOD LOCK ASSEMBLY

   Click here

7. Click here

   DISCONNECT ENGINE ROOM MAIN WIRE

   Click here

8. Click here

   REMOVE UPPER RADIATOR SUPPORT

   Click here

9. Click here

   DISCONNECT LIQUID PIPE SUB-ASSEMBLY

   
   
   1. 

      Remove the bolt.

   2. 

      Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.

   3. Remove the O-ring from the liquid pipe sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

10. Click here

    DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

    
    
    1. 

       Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

       Note:

       Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

11. Click here

    REMOVE COOLER CONDENSER ASSEMBLY

    
    
    1. 

       Disengage the 2 claws.

    2. Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.