Click here

BLOWER UNIT REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    PRECAUTION

    Note:

    Make sure to perform initialization after replacing the No. 1 blower damper servo sub-assembly. If initialization is not performed, the air conditioning unit assembly will not perform properly as the air conditioning amplifier assembly will not be able to recognize the position of the No. 1 blower damper servo sub-assembly.

  2. Click here

    REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  3. Click here

    REMOVE BLOWER ASSEMBLY


    1. B0066OL

      Disconnect the connector.

    2. Disengage each clamp and disconnect the air conditioning harness assembly.

    3. B006895

      Disconnect the drain cooler hose.

    4. Remove the screw.

    5. Disengage the 3 claws and guide, and remove the blower assembly from the air conditioning radiator assembly.