CHILD RESTRAINT SEAT ANCHOR BRACKET INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY


    1. A01FOWMN01

      Temporarily install the child restraint seat anchor bracket sub-assembly with the 3 bolts.

    2. Fully tighten the 2 bolts (A) first, then the bolt (B) to install child restraint seat anchor bracket sub-assembly.

      Torque:
      Bolt (A)
      31 N*m  { 316 kgf*cm, 23 ft.*lbf }
      Bolt (B)
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    3. Install the clip.

  2. INSTALL REAR SIDE SEATBACK ASSEMBLY

    Click here

  3. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    Click here

  4. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  5. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here