AIR CONDITIONING SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZE AIR CONDITIONING SYSTEM

1. Customizing with the GTS.

   Note:
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   Tip:

   The following items can be customized.

   
   

   1. Connect the GTS.

   2. Turn the engine switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Customize Setting / Air Conditioner.

   5. Select the setting by referring to the table below.

      
      
      1. Air Conditioner

         Tester Display	Description	Default	Setting	ECU
         Set Temperature Shift	Function to perform control with the shifted temperature versus the displayed temperature	Normal	00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C	Air conditioning amplifier assembly
         Evaporator Control	Function to set the evaporator control to the automatic position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up	Automatic	0:Automatic,1:Manual	Air conditioning amplifier assembly
         Compressor Mode	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off	Automatic	0:Automatic,1:Manual	Air conditioning amplifier assembly
         Air Inlet Mode	Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly	Automatic	0:Automatic,1:Manual	Air conditioning amplifier assembly
         Foot/DEF Auto Mode	Function to turn the airflow to foot/defroster automatically when AUTO mode is on	ON	0:ON,1:OFF	Air conditioning amplifier assembly
         Foot/DEF Automatic Blow Up Function	Function to increase the blower level automatically when the defroster is on	ON	0:ON,1:OFF	Air conditioning amplifier assembly
         Ambient Temperature Shift	Function to display the shifted ambient temperature versus the actual ambient temperature	Normal	0000001:-3C,0000010:-2C,0000100:-1C,0001000:Normal,0010000:+1C,0100000:+2C,1000000:+3C	Air conditioning amplifier assembly
         Emission Gas Sensor Shift	Function to change the sensitivity of the smog ventilation sensor*1	Normal	0000001:Much Less,0000010:Less,0000100:Little Less,0001000:Normal,0010000:Little More,0100000:More,1000000:Much More	Air conditioning amplifier assembly
         Add Foot Air in FACE Mode	When FACE mode is selected, additional air is blown to the foot area. Selecting OFF will cancel this additional air flow	ON	0:ON,1:OFF	Air conditioning amplifier assembly
         ECO MODE Cancel	Function to cancel ECO mode when set to ON	ON	0:OFF,1:ON	Air conditioning amplifier assembly
         Refrigerant Shortage Check	Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON	ON	0:ON,1:OFF	Air conditioning amplifier assembly
         Fan speed increment control	Function to set the speed to reach the target blower fan speed when AUTO mode is on	Normal	001:Slow,010:Normal,100:Fast	Air conditioning amplifier assembly
         FACE Wind Amount Adjust Function	Function to adjust the amount of the wind that goes out of FACE*2	ON	0:ON,1:OFF	Air conditioning amplifier assembly
         Outside Air Mode Auto Switch Function	Function to automatically change the air inlet to FRESH mode when the engine switch is off for 60 seconds	ON	0:ON,1:OFF	Air conditioning amplifier assembly

      2. 
         
      3. 
         
         10. 
             
         11. 
             
         12. 
             
         13. 
             
         14. 
             
         15. 
             
         16. 
             
         17. 
             
         18. 
             
         19. 
             
         20. 
             
         21. 
             
         22. 
             
         23. 
             
      
      

      • *1: w/ Mirror Heater

      • *2: for Europe

2. Customizing using the multi-display.

   
   

   1. Turn the engine switch on (IG).

   2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Climate settings.

   3. Select the setting by referring to the table below.

      Table 1. Climate settings

      Display	Default	Content	Setting	ECU
      Smog sensor sensitivity*	0	Function to change the sensitivity of the smog ventilation sensor	-3, -2, -1, 0, +1, +2, +3	Air conditioning amplifier assembly
      Auto A/C mode	On	Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off	On or Off	Air conditioning amplifier assembly
      Efficient ventilation mode	On	In case of turning the A/C on to cool the cabin down quickly, this function changes the mode automatically to recirculation air mode	On or Off	Air conditioning amplifier assembly

      
      

      • *: w/ Mirror Heater